Spray Treatment is the means of treating the skin with spray oxygen.

1. Prep skin prior to the procedure with your preferred protocol.
2. Click the “Oxygen Spray Device” button in the ON position.
3. Set the Operation Time.
4. Mix 2-3 drops of preferred essential oil diluted with purified water into the small cup of the O2 sprayer, water should be about 2/3 of the cup, and make sure the lid is tightly sealed.
5. To spray water mist hold the spray gun, press the control button to release oxygen, and pull backward.
6. Spray oxygen from top to bottom, starting from the forehead to the neck being careful not to spray into the eyes or nose. If necessary, an aesthetician can manually manipulate the skin to more efficiently absorb the products into medium or deep wrinkles. Continue spraying until the skin reaches maximum absorption of the product.

For maximum efficiency, all serums and products used in the sprayer must be diluted. Follow the guidelines below:

1. The product should be liquid when using the oxygen sprayer.
2. Always void spraying into the mouth or nose when spraying oxygen.
3. Clean the cup reservoir and pipe inside the sprayer after EVERY use to avoid clogging the machine’s tubes. To Clean, pour purified water into the small cup, press the control button and then pull backward.